Simatool - bearing mounting tools - Laurels Investments Zambia | Borehole Equipment, Suppliers of Instrumentation, Lubrication Systems, Electrical, Automation, Geo-physical, Dewatering & Drilling Equipment

Go to content

Main menu

Simatool - bearing mounting tools

Products > Simatec > Simatool

Bearing Fitting Tool FT 33
Minimised danger of damaging the bearing
The simatool bearing fitting tools are designed for the fast, precise and secure mounting of bearings with bore diameters from 10 to 50mm. The right combination of impact rings and impact sleeves makes sure that the mounting forces never go through the rolling elements of a bearing.
Impact rings are made of extremely shock-resistant material
Even power transmission to the bearing rings due to the special construction of the impact rings
Nylon double-sided hammer head prevents damage of the bearings effectively
Also suitable for the fitting of bushings, seals, pulleys, etc.
Suitable for a wide range of bearing sizes
Impact rings and impact sleeves are also available individually
Blow-back proof hammer FT 33-H included
No mechanical damage of the bearing during the cold mounting process

Cold mounting of bearings
Incorrect mounting can lead to damages and to an early breakdown of the bearing. Reasons for this can be:

Damages caused during the mounting process
Wrong tolerances of the bearing carrier on the shaft or inside the housing
Loosening of the locknut during operation
Burrs and damages on the shaft and the housing seats and shoulders

Interference fits - cylindrical bearing shaft
For most bearings either the inner or the outer ring (in certain cases even both) are mounted onto the shaft or into the housing with an interference fit. Please review the documentation of the bearing manufacturer for information.

Back to content | Back to main menu